The Steel City 6-Step Program
Our proven process for delivering commercial, government and mission-critical electrical projects on schedule, on budget and without surprises.
General contractors and owners hire Steel City Electric because they know exactly how we will run their electrical scope — from the first site walk to 24/7 service after turnover. This is our 6-Step Program: the same process on every commercial, industrial, government and mission-critical project we build across Bradenton, Sarasota, Lakewood Ranch and Tampa Bay. Florida State Certified (EC13014807), fully bonded and insured.
Built on S.T.E.E.L.
Every project runs on five commitments.
The 6 Steps
Discovery & Design Assist
We walk the site or the drawings with you, confirm existing service capacity, utility availability and site constraints, then calculate connected and demand load and size the service and distribution. Design-build or plan-and-spec, we work with your engineer on the one-line, panel schedules and lighting layouts so the numbers are right before anyone orders gear.
Estimate & Value Engineering
You receive a scope letter that reads line by line with your spec, with clarifications called out, alternates priced and realistic value-engineering options that lower cost without lowering quality. Our proposal comes with proof of license, bonding and insurance so your owner has nothing to chase.
Contract, Permits & Utility Coordination
Contract executed and schedule of values set. Switchgear, fixture and controls submittals go out immediately so long-lead equipment is released early. We handle the FPL, Duke Energy, TECO or Peace River service application, transformer and meter requirements, and pull the electrical permit so the utility is ready when the building is.
Rough-In & Service Entrance
A site-specific safety plan and kickoff with your superintendent come first. Conduit, duct bank and grounding go in with the slab; wall and ceiling rough-in follows the framing from coordinated drawings. Switchgear, panelboards, transformers and standby generators with automatic transfer are set, terminated and torqued to manufacturer specification.
Finish, Testing & Inspection
Receptacles, equipment connections, LED lighting and controls, EV charging and low-voltage pathways are installed clean and labeled. Insulation-resistance testing, torque verification, phase rotation and emergency-lighting tests are documented, and we walk every inspection with the AHJ.
Commissioning, Closeout & 24/7 Service
Generator load-bank and transfer testing, lighting-control programming and a walkthrough with your facilities team. As-builts, O&M manuals, warranty letters and final lien releases are delivered together — and after turnover, the same fully bonded and insured company that built it answers the phone 24 hours a day.
Let’s build together
Send us your plans for a line-by-line scope letter, or call (941) 279-4574 for 24/7 emergency service. General contractors can submit bid invitations directly.
Submit a Bid Invitation
Contact Us
Download the 6-Step Program (PDF)
Steel City Electric · 11065 Gatewood Dr, Suite C-101, Bradenton, FL 34211 · Florida State Certified Electrical Contractor EC13014807 · Fully bonded and insured · Serving Manatee, Sarasota, Hillsborough, Pinellas, Charlotte, DeSoto and Lee counties.